Towertalk
[Top] [All Lists]

Re: [TowerTalk] Protecting Buried Guy Anchors

To: "TOWERTALK@contesting. com" <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Protecting Buried Guy Anchors
From: Don Moman VE6JY <ve6jy.1@gmail.com>
Date: Wed, 13 Oct 2010 22:08:11 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you have insulated guy wires, no galvanic current can flow. If not:
insulate them....  1 amp for 1 year consumes 20 lbs of anchor - so even a
few milliamps over time from a small earth potential difference can weaken
your anchor. Protecting the anchor rod from the earth with tar/pitch
compound can't hurt either.

73 Don
VE6JY

On Wed, Oct 13, 2010 at 9:35 PM, Mark Robinson <markrob@mindspring.com>wrote:

> I have installed the standard Rohn GAC303 guys anchors into buried concrete
> per the Rohn drawings.
>
> I was talking to a tower installer who says that he has seen theses buried
> guy anchors eaten away in only a few years.
>
> Thinking about this I imagine that if the ground was acidic it would eat
> the
> galvanizing zinc of the steel rod very quikly and then the steel below
> would
> not last very long. Would it be a good idea to protect against this by
> applying lime at regualr intervals around the guy anchor to increase the
> soil ph?
>
>
> I think that I am OK since I have pulled 8 foot copper ground rods that
> have
> been in the ground here for several years and they came out shiny and
> bright.
>
>
> Mark N1UK
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>