In my opinion any old telrex should be run through an optimizer before being
put back up on a tower. I tested and retuned 3,4,and 6 ele 20m, 8ele 15m,
and a big 10m one... they all needed major retuning, the 10m one was a
better 11m antenna than 10m. when the 6 element 20m was optimized one whole
element was virtually worthless, on the 8 ele 15m the optimizer removed 3
elements to make it better!
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Joe Barnes [mailto:n4jbk@comcast.net]
> Sent: Saturday, August 14, 2010 19:40
> To: towertalk@contesting.com
> Subject: [TowerTalk] 2 telrex 6m624's versus M2 6m9khw
>
> I have 2 telrex 6m624's ( 6 elements 24 foot boom) that I am planning to
> stack with a tennadyne t10 between them.
>
> The Telrex's will be stacked 14 or so feet apart per telrex's
> instructions.
>
> My question is that do you think that the telrex's will perform better
> than say a M2 6m9khw?
>
> I know that nothing will last like the telrex's but that is another
> matter.
>
> Thank you for your help.
>
> Joe N4JBK
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|