EHS Guy wire is so cheap that it isn't worth messing around with unknown
cables. It is all the fittings and fixtures needed to make the guy assembly
that costs the money.
The Al wire is most likely as weak as water and is often supported by a
steel messenger line
Mark N1UK
----- Original Message -----
From: <HansLG@aol.com>
To: <towertalk@contesting.com>
Sent: Thursday, 11 August, 2011 9:53 AM
Subject: [TowerTalk] Fwd: Has anyone made use of aluminum pole to house
wire?
>
> I wouldn't trust it as guy wires. The wire is intended to conduct
> current.
> If you open up a little of the cable and "mess around" with the wires you
> find them very brittle. If they left some 5/16 galvanized steel, that's a
> different story.
>
> To use it for antennas should be OK, a little heavy though. You will
> notice
> if you stretch it too hard.
>
> Hans - N2JFS
>
> In a message dated 8/11/2011 12:01:34 A.M. Eastern Daylight Time,
> w5jv@hotmail.com writes:
>
> We recently had our utilities run underground to resolve some problems.
> Left is a coil of 5/16" diameter stranded aluminum power line, about 100'
> or
> more. Twoof the wires are black insulated, one is the ground return.
> Is this stuff suitable for guying a tower or making a "last forever" wire
> antenna ofsome sort?
> Would enjoy hearing responses to this.
> TIA,
> John
>
>
>
--------------------------------------------------------------------------------
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|