I discovered this myself. Here's what I learned.
The rotor plate is specifically designed to be installed in the bottom part
of a Rohn top section. The bottom part of the top section lacks a couple of
the "z" truss structural elements. You can then get the rotor plate mounted
in there. That is where you should mount the rotor. Any other place and it
will not fit.
73,
Jon
NA9D
on 1/13/03 7:54 PM, K1JB at k1jb@maine.rr.com wrote:
> I'm trying to put a triangular shaped Rohn rotator plate (accessory shelf
> AS25G) near the middle of a standard Rohn 25G section. But no matter how I
> twist and turn it, I can't get it to fit anywhere within the diagonal
> braces.
>
> Does anyone know of a way to do it without cutting the tower braces?
>
> The exact position is not critical; I would just prefer not to have to put
> it at the bottom of the section and have less mast available above the
> thrust bearing at the top.
>
> Tnx es 73,
> Joe, K1JB
>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)
Citizen of the People's Democratic Republik of Illinois
Life Member: ARRL, NRA
Member: AMSAT, DXCC
http://www.qsl.net/na9d
"A life lived in fear is a life half lived."
|