Towertalk
[Top] [All Lists]

[TowerTalk] torque tightening querry

To: <towertalk@contesting.com>
Subject: [TowerTalk] torque tightening querry
From: "Naveed at Hotmail" <conficious80@hotmail.com>
Date: Fri, 26 May 2006 12:32:27 +0500
List-post: <mailto:towertalk@contesting.com>
What should be torque tightening for the bolts 0f 20mm and 16mm ASTM A36 , ISO 
GRADE 5.8 bolts , of a lattice structure which is 60m high and has to resist a 
wind speed of 150kph , lying in seismic zone IV , dead load in addition to self 
weight is the feeder cables and ladder  wieghing 0.22kn/m , 8 antenas weighing 
23kg each, 4 microwaves wieghing 12kg each, having maximum allowable twist and 
tilt to be +-0.45 deg.Can you please tell me the source atleast.  ?



Regards
NAVEED IRSHAD
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>