[TowerTalk] Lifting Cable termination question

["Pat Barthelow" <aa6eg@hotmail.com>]

Dave Thonpson Said:
SNIP:
> What I suggest is that you check out the winch and the cable connection at
> the tower leg end.  If you ever need to replace it use a foundry not a boat
> place.  I use bricko blocks under my tower with 2 by 6's to support the
> tower just in case.
>
> The original winch was very flimsy and broke on me years ago.  I got a
> replacement at Granger.  I notice that Northern Electric sell the same
> Fulton Winch...but never use Northern Electric for the clamp.  Their 
> machine
> is for boat (horizontal pull) winches and will pull off easily in vertical
> use.

Dave's comments caught my attention, as I am about to buy, fabricate, and 
install a new lift cable in a Haeavy Duty old Tristao Tower (Now made by US 
Tower)   The Tristao is a 3 section, 54 ft extended length tower.  I am 
llooking for the scoop on techniques for terminating the lift cable with a 
thimble, and a crimp sleeve, something I used to call Nicopress.   The old 
Tristao tower cable's crimp sleeve is about 1.5 " long.   This termination 
has human  life critical and tower life critical functions so i need to 
recreate the termination properly.  Dave distinguishes horizontal pulls, 
from vertical, and differences in strengths of the termination.  How do I do 
a safe crimp to install the thimble?
For that matter, does any one supply premade properly terminated lifting 
cables for a designated tower    (Tristao 55' heavy duty)

thx, 73, de Pat AA6EG   aa6eg@hotmail.com


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk