Towertalk
[Top] [All Lists]

Re: [TowerTalk] HDBX-48 Tilt Up

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] HDBX-48 Tilt Up
From: "Gary \"Joe\" Mayfield" <gary_mayfield@hotmail.com>
Date: Tue, 11 Oct 2011 20:49:59 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes, it is the standard tilt base that Rohn sells.  There is no tree to work
with and the roof line is only about 12-15 feet up.  Some suggested pushing
it most of the way up with a Lull as seen here:

http://www.youtube.com/watch?v=wdrmgpp08Xs

I believe that will be the way to go.

Thanks and 73,
Joe kk0sd

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Wilson Lamb
Sent: Tuesday, October 11, 2011 7:43 AM
To: towertalk@contesting.com
Subject: [TowerTalk] HDBX-48 Tilt Up

Can you use a lift point in a tree or on your roof?  As long as you can get 
high enough to get started off the ground, you should be OK.

A few people and a ladder can likely push it up a ways, making the initial 
load less.

I'm assuming you have some sort of tilt base??  Tell us more.
Wilson
W4BOH 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>