Date: Sun, 21 Jul 2013 22:30:24 -0400
From: "Anthony W. DePrato" <wa4jqs@mikrotec.com>
To: towertalk@contesting.com
Subject: [TowerTalk] Which Balun with the TH7DXX
>What balun is being used with the TH7DXX. over the years i have
>owned a few hy gain ants and burnt up the Hy Gain BA baluns that
>were offered. so i went to wind your own coax baluns.. i was reading
>a few of the old articals on tower talk and saw where the TH7DXX
>would not work well with a coax balun.. my amps are Alpha 3 tubers
>and Henrys so dont want to have to replace their so called high power BA-4000
someday in the dead of winter hi hi... what are most of you using .
thanks for the help
73 Tony
## Is hygain/mfj still selling that useless BN-86 balun ?? I vaporized
3 of em back in the late 1970 s. Dunno why they would have the
audacity to still make it.
## coiled up coax is not the answer either, the Z is too low. Like gerald
sez,
the wire leads on the baluns output is part of the total DE ele length.
So if using coax... factor that in...and make the Y the correct length.
## 4 wraps of 213 U around 4 x 2.4 inch OD type 31 ferrite will do the
trick
for a balun.... but the assy has to be kept away from the boom. You don’t
want stray V
from boom to coiled coax. The BN-4000 will also work...and uses type 77
beads..which
are no longer made. They may well have switched to type 43 or type 31.
## I remember opening up several BN-86 baluns... they looked like the
ferrite had cracked,
or the magnet wire had arced across, between adjacent winding turns. Nothing
wrong with
voltage baluns..provide teflon sleeving is slid over the magnet wire. There
is magnet wire, then there
is magnet wire. The good stuff is polyimide/kapton..and has 15 kv
insulation. Then it requires 30 kv
to arc between adjacent turns. slide teflon tubing over the 15 kv magnet
wire...and u will never get it to arc.
## These days.. I would not mess with voltage baluns. A simple, bomb proof
one to one choke balun,
with a high Z is easy enough to fabricate fro 20-10m. 24 inches worth of
type 43 beads slid over 213 U
will also produce excellent results.. plus it can be taped right to the boom.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|