Date: Tue, 27 Sep 2016 17:52:18 -0400
From: "Victor A. Kean, Jr." <vkean@k1lt.com>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Replacement Bolts for Rohn GB45D
FWIW, Rohn lists bolt sets (bolt and corresponding nut and optional
locking device) in their catalog, including the size required by my
guy bracket. What is not at all clear is whether or not the nuts
provided via the catalog are the so-called "heavy" nuts that are
used on the guy bracket.
Another data point: these new bolts are A325 standard rather than
grade 5.
Victor, K1LT
### Wrench size for Regular nuts are typ 50% bigger than the bolt diam.
Heavy nuts use a slightly bigger wrench size... > 50%.
## A325 is an ASTM spec. Grade 5 is a SAE spec.
A325 IS the same strength as a Grade 5 bolt.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|