I have been using RG400 for all my inner station connections from the bulk
head to the 6 X boxes receive line switches.
I use these connectors from EBay a crimp shield and solder center conductor.
PL259 crimp RG400 Silver-plated.
I then use a short piece of heat shrink at the crimp sleeve then a color
coded longer heat shrink color coded that acts as a easy determination to
what belongs to what and a strain relief.
I do not use these out side. That’s RG214 ..
My .02
Wayne W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com
<john@kk9a.com>
Sent: Thursday, March 15, 2018 4:37:59 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Skinny QRO coax jumpers for station interconnection -
RG400
I use RG58 reducers - Amphenol of course.
John KK9A
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
On 3/15/2018 9:48 AM, Tim Duffy wrote:
Every shack jumper - for 11 stations - at K3LR - is RG-400 with Amphenol
831SP UHF silver male connectors.
Hi Tim,
Do you have a part number for silver plated reducers? I looked and
couldn't find one.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|