Hi Howie,
Good info in your write-up. Thanks for the alumoweld source.
Bill, W2AY, also provided that link. I had checked the various wire sources
but didn't think of MFJ/Hy-Gain.
Re: seized standoffs. I had checked with Tom N6BT but he said they weren't
available anymore. He suggested hex standoffs. I found some of the
appropriate size
from McMasters. I'll be using liberal amounts of anti-seize.
BTW, this is being rebuilt as a 30m yagi to be side-mounted at 55 ft.
73,
Kris N5KM
------------------ -------------------------------------------
Date: Sat, 21 Dec 2019 14:59:37 -0500
From: Howard Hoyt <hhoyt@mebtel.net>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Force12 rebuild
Message-ID: <fb5e9e5e-f058-0001-048a-393984b48ca6@mebtel.net>
Content-Type: text/plain; charset=utf-8; format=flowed
Hi Kris,
I went through this a few years back and published a blog on the process
including links to materials:
https://proaudioeng.com/force-12-c-4sxl-rebuild/
Good luck and have fun!? I did...
Howie / WA4PSC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|