Okay, I'll finally ask. How do you true up the tapered self-supporting
tower?
73,
Joe kk0sd
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Brahmangou@aol.com
Sent: Friday, July 30, 2010 11:13 AM
To: jpk5lad@cox.net; towertalk@contesting.com
Subject: Re: [TowerTalk] Re Plumbing a Tower
The pan of water will dampen the movement of the plumb bob at the bottom of
the string, but will not help the plumb line to remain vertical and
straight in the breeze. I use a plumb line regularly at work, and they are
a
pain outdoors. Here is an easier way to plumb a tower.
I will use the assistance of a picnic table, ice chest, or anything with a
surface that is easily leveled placed about the same distance from the
tower as the tower is tall. On that surface place your framing square
vertically. If you have the surface of the table level, the square is now a
true
vertical. The first time you will probably need an assistant to hold the
square. Have the assistant place a magnetic level on the flat fertical
surface
of the square to keep it vertical in that direction also. Place yourself in
position so that the tower and vertical edge of the square are in
alignment. Now look down the edge of the square and compare it to the
tower. You can
get amazing accuracy with this method, but takes a little practice.
Marty AB5GU
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|