Craig, RG214 is oversized for standard PL-259's and the 2-piece N's which
emulate the back end of a PL-259. The O.D. of the vinyl jacket is > .410",
which is about all the standard connectors can accommodate. There are
several varieties of Type N (mil-type, 5-piece) connectors specifically
suited for RG-214/U, however. The ubiquitous UG21D/U (type N) that most of
us use for RG213/U and other .405" diameter cables are actually intended for
RG-214/U, and that's why they are somewhat loose on RG213/U. -WB2WIK/6
"If everything seems under control, you're just not going fast enough." -
Mario Andretti
> -----Original Message-----
> From: Craig Clark [SMTP:jcclark@prexar.com]
> Sent: Thursday, September 26, 2002 5:37 AM
> To: towertalk@contesting.com
> Subject: [Towertalk] rg214
>
> I'm having problems installing two piece N connectors of RG214.
>
> I suspect PL259's would be a problem too.
>
> Anyone have any "pearls of wisdom" they'd like to share off-line with me?
>
> I have looked quickly at the RFI, Amphenol and Belden web sites and so
> far,
> found nothing.
>
>
> 73, Craig Clark, K1QX
>
> RADIOWARE AND RADIO BOOKSTORE
> PO BOX 209
> RINDGE NH 03461
> 603 899 6957
> WWW.RADIO-WARE.COM
>
>
>
>
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
> additional 5 percent off any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|