K4SQR told me that the minimum should be at least 1/2 wavelength separation
from any vertical metal structure.
73, Dick WC1M
> -----Original Message-----
> From: towertalk-admin@contesting.com
> [mailto:towertalk-admin@contesting.com]On Behalf Of Major Ron
> Sent: Friday, September 06, 2002 2:08 PM
> To: towertalk@contesting.com
> Subject: [Towertalk] 4-SQ Separation
>
>
> I am getting ready to lay out the bases for the 40-80-160 4-squares. My
> question is this: What is the best separation distance between the
> verticals. 1.85MHz is the target for 160M. Thanks to all.
>
> Ron, KA9ALC
>
>
>
|