Towertalk
[Top] [All Lists]

[TowerTalk] quad driven element tuning

To: <towertalk@contesting.com>
Subject: [TowerTalk] quad driven element tuning
From: ku7i@hotmail.com (Lane Zeitler)
Date: Sat, 07 Apr 2001 07:35:42 -0700
Gents,
My 5 band quad uses one feedline for 20-17-15 and one for 12-10. I attempted 
to zero in the fo of the driven loops yesterday for 20-17-15. All three 
bands are a little high in fo so I added about 4 inches of wire to each 
driven loop. The fo did not change one khz!!!! What is going on???? 
Interaction btwn the three bands???? I am not using any type of matching 
network, just fed directly with 50 ohm coax and all three of these bands are 
parallel fed. Any ideas of why the fo did not budge???

Lane
Ku7i

P.S. I have not attempted to zero in 12-10 yet.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


List Sponsor:  ChampionRadio.com - Trylon self-supporting towers, safety
equipment, rigging gear, LOOS tension guages & more!  
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>