Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: AM tower available, Ham or broadcast use

To: "Keith Dutson" <kdutson@sbcglobal.net>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] FW: AM tower available, Ham or broadcast use
From: "D. Scott MacKenzie" <kb0fhp@comcast.net>
Reply-to: kb0fhp@comcast.net
Date: Thu, 15 Sep 2005 11:38:20 -0400
List-post: <mailto:towertalk@contesting.com>
HOWEVER - it would be absolutely dynamite on 160M and 80M.....with a
professional radial system to boot.. now with a couple of beverages......

Since they are moving... I wonder if they would be willing to abandon the
site, and lease it for a nominal amount to a local club or ham....

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Keith Dutson
Sent: Thursday, September 15, 2005 11:14 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: AM tower available, Ham or broadcast use


One other note to add...

I think this tower was not designed to handle a large rotating antenna.  The
bracing is flat, which is great for climbing, but not good for twisting.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of David Robbins
Sent: Thursday, September 15, 2005 9:23 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: AM tower available, Ham or broadcast use

$3500 for an almost 50 year old tower seems a bit expensive to me.  That
would be the equivalent of $175 for a 10' section.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net


> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Rob Atkinson, K5UJ
> Sent: Thursday, September 15, 2005 13:48
> To: towertalk@contesting.com
> Subject: [TowerTalk] FW: AM tower available, Ham or broadcast use
>
>
>
> FYI Broadcaster in CT has a 200' AM tower for anyone who will pay for
> it to
> be taken down and removed.   Doesn't want it taken down by anyone except a
> professional crew.
>
> rob/k5uj
>
> From: "WSHU Engineering" <paull@wshu.org>
> Subject: [RT] AM tower available, Ham or broadcast use
> Date: Wed, 14 Sep 2005 16:55:59 -0400
>
> We are moving  our AM station to  a new transmitter site and will have
> a 200 ft tower available, free, but you will need to pay for its safe
> disassembly by the professional tower company. Click the link below
> for details and pictures
>
> http://www.wshu.org/engineer/tower/amtower.asp
>
> Paul A. Litwinovich
> Director of Engineering
> WSHU AM & FM, WSUF-FM
> FCC License  PG-GB 039245
> "RF IS GOOD FOR YOU"
>
> _________________________________________________________________
> FREE pop-up blocking with the new MSN Toolbar - get it now!
> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>