Towertalk
[Top] [All Lists]

[TowerTalk] 4 way guyed, tiltover 25G?

To: <towertalk@contesting.com>
Subject: [TowerTalk] 4 way guyed, tiltover 25G?
From: "Jim Jarvis" <jimjarvis@comcast.net>
Reply-to: jimjarvis@ieee.org
Date: Sun, 30 Jan 2005 05:32:21 -0500
List-post: <mailto:towertalk@contesting.com>
TT:

Just wondering if anyone else has seen the tiltover
system which is used by several Frankford Radio Club
members?  Locally called the W3GM design, but Gerry Mathis
may have cribbed it from someone else.

What he did was 4 way guy his 100' 25g towers.  Then, he
attached 30' sections of 25g at the base, as permanently
installed ginpoles.  The key to this is the base fixture
which ties the two towers together...and the foldover hinge
can be a std. rohn, or can be incorporated into the fixture
tieing the tower sections together.

Side guys have to be the same length.  Back-guys go to the
ginpole tower, which in turn ties into a deadman/cable/winch
system.

The 'ginpole' tower goes up, as the big tower lays over.
Gerry drove the lifting mechanism with a half inch electric 
drill.  Took maybe 40 minutes, each way, to lay over a 100'
stick for antenna work.  He had 5 of these, as I recall, 
plus a few smaller 25g's for higher angle stuff.  

Some of the FRC guys have done the same thing with 45G, although
the base unit which ties the towers together becomes a serious
bit of material.  

n2ea
jimjarvis@ieee.org 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>