Towertalk
[Top] [All Lists]

[TowerTalk] steppIR Gain--test method

To: <towertalk@contesting.com>
Subject: [TowerTalk] steppIR Gain--test method
From: "Jim Jarvis" <jimjarvis@comcast.net>
Reply-to: jimjarvis@ieee.org
Date: Wed, 16 Mar 2005 13:27:45 -0500
List-post: <mailto:towertalk@contesting.com>
TT:

If I recall correctly, Mike and Jim have their own range,
with the unit under test on one tower, and an HP spectrum
analyser connected to a dipole on another tower,  many
wavelengths distant.  Tower heights were on the order of 
60'.  A calibrated attenuator was used with the SA.

The testing methodology was described on their website,
back when they sold me the 3 el, 3 years ago now.  

Comments regarding narrowbanded antennas, current,
drive point impedance and fwd gain, all noted.

Theoretically, the steppIR could be a bit better
than a canonical yagi...in practice, it's hard to tell,
because the differences are too small to matter.  
But it IS fun to talk about.   

n2ea
jimjarvis@ieee.org 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>