I use the four pin version of the flat NAPA connectors with my SGC-230 tuner
control cable. Note that out of the package they are a very, very tight fit. A
bit of grease on the pins and sockets make all the difference. They still snap
together securely but don't need to be pried apart. I followed W8JI's
recommendations found here:
https://www.w8ji.com/dielectric_grease_vs_conductive_grease.htm
Patrick, W7TMT
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Dave Sublette
Sent: Saturday, March 20, 2021 04:56
To: Randy Lake <randyn1kwf@gmail.com>
Cc: Dave Sublette <k4to@arrl.net>; kj6y--- via TowerTalk
<towertalk@contesting.com>
Subject: Re: [TowerTalk] Connector advice
Thanks for all of the advice. I have decided to go to the Auto parts store and
look for some of those trailer hitch connectors. They are flat, in line and
have 2 to 6 or eight pins.
73,
Dave, K4TO
On Sat, Mar 20, 2021 at 7:51 AM Randy Lake <randyn1kwf@gmail.com> wrote:
> Take a look at Balkamp 755-1572 at any NAPA Auto Parts store. These
> are waterproof and last forever. I have some that have been in service
> for 30 years.
> Randy N1KWF
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|