Steve is 100% correct on this! I've found this necessary even inside the
shack. I had bad RF problems (RF getting into keyers, computers, etc) and
it was cured by using pliers to 'gently' seat PL-259's to coax switches,
etc.
Mike W9RE
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of K7LXC@aol.com
> Sent: Sunday, August 31, 2003 12:58 PM
> To: mcduffie@actcom.net; towertalk@contesting.com
> Subject: Re: [TowerTalk] Making rotator loops separate
>
>
> In a message dated 8/31/03 10:36:37 AM Pacific Daylight Time,
> mcduffie@actcom.net writes:
>
> > > Pl-259's are notorious for coming loose anyway, and in the loop
> environment
> > > you're just asking for trouble.
> >
> > I've NEVER had a PL come loose on me, even the ones that weren't
> > taped. I put them on as tight as my hands will do it without tools,
> > and that's it. Properly installed, they shouldn't come loose with
> > layers of tape over them anyway.
>
> Well, you've been lucky. Hand-tight is NOT recommended. Use
> the 2-plier
> technique to 'gently' seat them with a barrel connector and
> 1-plier on baluns,
> etc.
>
> Cheers,
> Steve K7LXC
> TOWER TECH -
> Professional tower services for commercial and amateur
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more. Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|