Towertalk
[Top] [All Lists]

YO Design Parameters for W3LPL 15M 6L Yagi

To: <towertalk@contesting.com>
Subject: YO Design Parameters for W3LPL 15M 6L Yagi
From: donovanf@sgate.com (Frank Donovan)
Date: Thu, 26 Dec 1996 23:37:54 -0500 (EST)
Anyone out there interested in high performance monoband Yagis???
I'll prime the pump by sharing the YO file for my 6 element 15M beam on a
48 foot boom.  Of course, I have YO files for all of my Yagis, and if
there is sufficient interest, I'll post the YO files for my 40, 20 and
10M Yagis.
73
Frank
W3LPL
donovanf@sgate.com

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6 Element 15M Yagi 48 ft Boom
Height 2340.000
21.000 21.225 21.450 MHz
6 elements, inches
            0.8750    0.7500 
  0.0000   72.0000   70.1822 
 50.5432   72.0000   60.2349 
108.1917   72.0000   58.9181 
235.5508   72.0000   55.5817 
403.9829   72.0000   53.2540 
570.0000   72.0000   46.1496 

Use H key to set elevation angle to 3.5 degrees

T-match parameters: 
Rod diameter 0.5" 
Rod spacing  5" 
Rod length   31" 
Lead length  3" 
Series Cap   99999 pf
Feed Z       200 ohms
   
Experience indicates that the driven element tip
must be lengthened to 67 inches, the length that
produces a modelled impedance of +j20 at 21.225 MHz





--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>