I also have a MAG 17 that emits noise that is picked up by my various
antennas, in varying degrees. It's most noticable on 28 mHz, showing up
every 33 - 38 kHz. I've tried putting a couple of snap-on-chokes on the
power cord and the video cord where they exit the monitor. No noticable
improvement. I think the RF is radiating right through the case.
If you are going to purchase another monitor, try one with a "CE"
(European) rating, their standards are much higher than Canadian/American
standards. In fact, I think it's a good idea to purchase ANY electronics
and components with the CE rating. Any other ideas?
By the way, I believe there's an RFI Reflector on the "Contesting.Com" site.
73, Paul
VE3ZT
_____________________________________________
At 11:36 AM 02/07/99 , Harv Shore, you said...
"
"I have a MAG 17 that seems to be reasonably clean.
"That is I have not noticed any garbage of the Ham Radio (FT1000) which is on
"the same 110V line
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|