Towertalk
[Top] [All Lists]

Re: [TowerTalk] how to install the tower base over a sloping roof???

To: towertalk@contesting.com
Subject: Re: [TowerTalk] how to install the tower base over a sloping roof???
From: "john@kk9a.com" <john@kk9a.com>
Date: Sat, 12 Dec 2015 07:47:50 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Unless you have an extremely strong roof, I would mount the tower on the
ground. You can even bracket it to the house for extra strength. I am sure
that on occasion you get very strong wind. An antenna at 30' in the
Caribbean works very well.

John KK9A


To:     <towertalk@contesting.com>
Subject: [TowerTalk] how to install the tower base over a sloping roof???
From:   "Douglas Ruz \(CO8DM\)" <co8dm@frcuba.co.cu>
Date:   Fri, 11 Dec 2015 20:00:05 -0500


Hi,

I would like install an small tower over the concrete roof, only 3
sections, 10
ft each. 2 set of guy wires (3 + 3).

I install the 3 anchor points but when i try intall the tower base i found
the
roof is not 100 % flat. It is an sloping or pitching roof...it is very
soft...about 5, 7 or 10 degrees. i am planning bolt the base to the roof but
not crossing the roof...i will bolt the base in 4 points with 3/8 inch bolts
and will drill about 2 1/2 inch inside the roof.

How can i correct the sloping to put the base 100% flat (level) ???

Thanks,

73....Douglas, CO8DM

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>