And I think the Microham product W4TV mentioned may be what I'd seen
in the past, but it's only available now for monoband use, requiring
the addition of a phasing line.
The microHAM Stack Switch is a multi-band product. The half-wave line
is only necessary to enable out of phase operation for either the top
or bottom pairs and, yes, out of phase is limited to monoband operation.
73,
... Joe, W4TV
On 2022-07-19 11:40 PM, Lee Hiers wrote:
On Tue, Jul 19, 2022 at 9:10 PM Richard Thorne <rthorne@rthorne.net> wrote:
https://www.arraysolutions.com/antennas-switching/dual-feedline-option-so
Perfect, thanks N5ZC - that's simpler than what I'd envisioned doing in my
mind and back-of-napkin scribbles.
And I think the Microham product W4TV mentioned may be what I'd seen in the
past, but it's only available now for monoband use, requiring the addition
of a phasing line.
Unsaid, but I would be using triband antennas and a SixPak.
Thanks to all who chimed in!
73 de Lee, AA4GA
Rich - N5ZC
On 7/19/2022 3:34 PM, Lee Hiers wrote:
Hi all...
Does anyone know of a commercial stack-matching box (for 2 antennas) that
will send the unselected antenna to another port? As in: I'm using the
high antenna on radio A, and that makes the low antenna available for use
on Radio B. And vice-versa.
I envision two antenna connections and a stack output and an alternative
output...something along those lines.
I thought I'd seen a commercial product that did this, but I can't find
it
now. I'm sure something could be rigged up using external relays (and
I'd
love to hear from anyone who's done that as well), but I would like to
evaluate other options.
Thanks,
Lee, AA4GA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|