I would normally agree but this is for a multi-turn VLF loop antenna
where I removed an inch of insulation from each turn so I could tap that
point and select turns with a rotary switch. Each turn is only 1/2"
apart. But I left it outside too long before I got to it and the copper
tarnished fast. Going to have to be soldered in this case. Thanks for
the suggestion however. 73
Gedas, W8BYA EN70JT
Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.
On 2/19/2023 7:06 AM, Rob Atkinson wrote:
I quit soldering copper wires together outside years ago. Use a
copper split bolt instead. Fast, easy, weather doesn't matter, works
FB for years and years, never had one fail.
Rob
K5UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|