Re: [TowerTalk] 10/15 yagi design

[John Simmons <jasimmons@pinewooddata.com>]

JK antennas have designs that you might look at for ideas.

-de John NI0K

john@kk9a.com wrote on 7/9/2020 8:23 PM:
> In the past I found it difficult to design interlaced Yagis so I have
> avoided building them. Now that AutoEZ is available it should be easier.
>
> GL
> John  KK9A
>
>
> Dave Sublette k4to wrote:
>   
> I am looking for a design for a 10 and 15 meter yagi on a single boom.  I
> have a couple of ideas to model, but I thought I would ask here to see what
> your favorites are.  I don't want to buy a commercial product.  I have
> plenty of boom and element tubing and have home brewed all of my antennas
> through 432 MHz for 30 years.
>
> I use a program called Antenna Model which works quite well.   In the past
> three years I have modeled and put up a pair of 40M Moxons, a four element
> 20M OWA (G0KSC design modified for my tubing sizes), and a full sized 40M
> dipole. They all work great and match the model closely.
>
> I'm just looking for ideas.
>
> Thanks and  73,
>
> Dave, K4TO
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk