Rick,
It looks like there are two types made by J.W. Harris. They are "Stay-Brite" and
"Stay-Brite 8". Which one have you been using? It looks like it needs a bottle of flux
that goes with it. No flux inside the solder.
I plan to give it a try.
73, Rich, N6KT
On Sunday, February 19, 2023 at 07:17:42 AM PST, Richard (Rick) Karlquist
<richard@karlquist.com> wrote:
The "secret" to soldering wires together outside is to use "Stay-Brite"
solder available at any welding supply shop. It is something like 96%
tin, 4% silver, and ZERO% lead. It does have a melting point about
100 deg C higher than 63/37 so use a decent soldering iron/torch. I
have thousands of outdoor Stay-Brite joints that are going
on 25 years old that are doing fine.
73
Rick N6RK
On 2/19/2023 4:06 AM, Rob Atkinson wrote:
I quit soldering copper wires together outside years ago. Use a
copper split bolt instead. Fast, easy, weather doesn't matter, works
FB for years and years, never had one fail.
Rob
K5UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk