Thanks - I've ordered one. I hope it's easier than the written
instructions suggest.
73, Pete N4ZR
On 7/30/2024 5:09 PM, Ken Bauer wrote:
I had to do the same thing on my Yaesu G-800DXA. See attached
instructions (which are the same for the G-1000DXA).
The pictures are found at the link in the text, but also here
directly: https://www.hamsupply.com/yaesu-illuminator-installation/
73, Ken WC6Y
On Jul 30, 2024, at 12:29 PM, Jack Brindle via TowerTalk
<towertalk@contesting.com> wrote:
Pete;
You might want to consider installing the Yaesu Illuminator LED board
from Ham Supply: https://www.hamsupply.com/yaesu-illuminator/
I have one, but haven’t installed it yet (a major move got in the
way. It is still in a box after three years)…
They have pretty good installation instructions, and for $24 it is
worth a try.
73,
Jack, W6FB
On Jul 30, 2024, at 2:21 PM, Pete Smith N4ZR <pete.n4zr@gmail.com>
wrote:
I need to replace the direction scale illumination bulb on my
G-1000DXA controller, but have so far failed to figure out how to
open the case, and hesitate to force things to get to ths bulb,
which I need to do to figure out what replacement to buy. Repeated
e-mails to Yaesu have not yielded a response on either question.
Can anyone help?
--
73, Pete N4ZR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|