Unless someone is running at least 3x the legal limit, I doubt any
amateur running legal amateur power levels will have any problem with
either an N connector or PL259. Andrew N connectors can actually
handle up to 10kW (peak) according to the spec sheets.
High SWR may be a different issue but I try to avoid high SWR here.
The only antennas I have that routinely operate under high SWR are fed
with 450 ohm line.
Anyway, my whole reason for using N was availability and cost.
Performance is a non issue because under HF amateur applications at
legal limit or less into a 50 ohm load there won't be any difference.
Ryan, N2RJ
On Tue, Apr 20, 2010 at 7:13 PM, Roger (K8RI) <K8RI-on-TowerTalk@tm.net> wrote:
>
>
> Ryan Jairam wrote:
>> I would just get N connectors and adapters and use that instead.
>> Practically nobody else but ham and CB use UHF connectors anymore.
>>
> To me the UHF are preferable to the N for HF if you run power and a high
> SWR. I look at N as a mistake. If I didn't have so may connectors
> already installed I'd go with the 7-16 DIN which might even be cheaper
> now days.
>
> I've never noted any difference up through 2-meters although others
> have. What we did different? I have no idea.
>
> 73
>
> Roger (K8RI)
>> Vy 73
>> Ryan N2RJ
>>
>> On 4/20/10, john@kk9a.com <john@kk9a.com> wrote:
>>
>>> These connectors are no longer made and most dealers seem to be out of them.
>>> Here is one dealer that has four of them and is asking $1500/each
>>> http://antennasystems.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=L44P&Category_Code=LDF4con
>>> .
>>> If anyone does have any L44P or L44U connectors that they would like to get
>>> rid of for a more reasonable price, please send me a direct email
>>>
>>> John john@kk9a.com
>>>
>>>
>>>
>>>
>>> To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
>>> Subject: Re: [TowerTalk] Heliax Connectors
>>> From: Steve Maki <lists@oakcom.org>
>>> Reply-to: "Tower and HF antenna construction topics."
>>> <towertalk@contesting.com>
>>> Date: Mon, 19 Apr 2010 14:09:51 -0400
>>> List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>>>
>>> Steve Bagley wrote:
>>>
>>>> Ladies and Gentlemen:
>>>> I have read so much information concerning what connectors to use for 1/2"
>>>> heliax, I am thoroughly confused.
>>>>
>>>> I need to splice some heliax together for a long run, and terminate at the
>>>> tower and shack.
>>>>
>>>> My arrestors are a standard SO-239 connector.
>>>>
>>>> I would prefer to use the connectors designed for the heliax vs standard
>>>> 259's.
>>>>
>>>> Anyone have the appropriate part numbers and any concise input? Really
>>>> appreciate it!
>>>>
>>> Assuming you're talking about Andrew LDF4, the Andrew part numbers are:
>>>
>>> L44Z - splice
>>> L44P - UHF male
>>> L44U - UHF female
>>>
>>> I'm not sure any of these are actually made anymore, but can be found in
>>> stock at some dealers, and commonly at fleamarkets. Also RF Industries
>>> (RFI) makes a UHF male for LDF4 if I'm not mistaken.
>>>
>>> 73,
>>>
>>> --
>>> Steve Maki
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Ryan A. Jairam,
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|