Steve Zettel wrote:
>2. Attach two cables above the center of gravity (actually, a sheave with a
>long cable running through). Each cable to a two-and-half ton truck. One or
>two tending lines on the other side of the tower. Detach the guy wires and
>slowly lower the tower by moving the trucks toward the base.
It's a great way to *start* lowering... but what happens when the tower
is almost down? The lower it comes, the less lifting force the lines can
provide, until...
As a test, try lowering a 20ft pole using two ropes held at waist level.
Then call the crane company.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.demon.co.uk/g3sek
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|