> I plan on installing a remote coax switch (RCS-4) approximately
>300 feet
>from the ham shack. What is the minimum size 8 conductor wire should I use
>for the run?
> Thanks in advance.
> Doyle/N4VV
____________________________________________________________________________
Doyle, the RCS-4 does not require any additional cable to control it. It is
controlled via the current that is carried through the coax's center conductor
and is decoupled at the RCS-4 end by a capacitor and RFC. Only the RCS-8
requires a cable to control the relays.
Rod, N5HV
w5hvv@aeneas.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|