Towertalk
[Top] [All Lists]

[TowerTalk] Remote Coax Switches

To: <towertalk@contesting.com>
Subject: [TowerTalk] Remote Coax Switches
From: dick@merlin.libelle.com (Dick Flanagan)
Date: Tue, 29 Jul 1997 08:56:47 -0700
What is the Conventional Wisdom on remote coax switches?

I am about to erect a US Tower HDX-572MDPL (the base is curing now).  My
intent is to mount a TH-11DX, a 40-2CD (with HD mods) and an
as-yet-undetermined long wire from the top.

This calls for a minimum of three coax runs and one rotor cable.  All this
cable needs to be run through an underground conduit from the shack along
with the 110 VAC for the tower winch.  Caution also dictates even a fourth
coax run to allow for the inevitable fourth antenna that I will need as
soon as everything is finished!  :)

This is a lot of coax, folks!  A lot of lightning supression, a lot of
weight, a lot of room in the conduit, a lot of money.

For the cost of two of those runs of coax, I can buy an Ameritron
5-position remote coax switch that will give me room for expansion.

Assuming I don't intend/need to use more than one of these tower-mounted
antennas at the same time, what are the pros and cons of these remote
switches?  Are they difficult to properly ground?  Are there better
switches than the Ameritron?

What say you, Oh Wise Reflector?!

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada
Visit http://www.delphi.com/electronic/



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>