I'm befuddled on what to do for a new VHF (and/or VHF/UHF) rig.
I have a Kenwood TS-711A that is vintage 1985. It is beginning to have more
frequent problems and I need to get something in the works before contest
time just in case.
I just don't see anything that shines out there in the way of spec's. I've
damn near looked at everything. I was close to buying an Icom IC910 but
after a few conversations with other UHF/VHF'rs it seems to be a poor weak
signal rig, and really bad with strong adjacent signals.....not a good thing
for my locale. The bands it covers would be a good choice for my situation
since anything above 2M would be a "bonus", meaning that I don't run
anything above 2M now, especially since the tower is a long long way from
the shack, but it would always be an option, as opposed to buying an
all-band wonder and having another bunch of HF bands that I already have a
rig for.
I suppose some options are:
(1) Buy an all-band wonder - Icom 746Pro, or, Kenwood TS2000. You guys/gals
using these, are they good, bad for weak signal ???
(2) Buy a VHF/UHF only....Anyone have an IC910 and like it, or do you just
tolerate it. I don't do sats so if that's what its good for, its a no-buy
for me.
(3) Buy an HF only rig (another FT1000MP) and add a transverter.
(4) Homebrew a rig (thanks Zack). I would have trouble here since I already
have twenty pairs of glasses, ten of which I need to complete this e-mail.
(4) Quit whining and send the TS711 into Kenwood for an overhaul.
The all-band wonders seem to be just an adequate rig on all bands, not a
great rig on any band.
Comments appreciated !!
73 de N8GLS, Brad
|