Chris I use Magnecor wires, and have been for over
8 yrs and YEs there great.
ed
----- Original Message -----
From: "Chris Boone" <Cboone@earthlink.net>
To: "Rick Robinson" <k8dxn@charter.net>
Cc: "vhf" <vhf@w6yx.stanford.edu>; "Icom" <Icom@mailman.qth.net>; "50 MHZ"
<50mhz@mailman.qth.net>; "PackRats" <packrats@qth.net>; "Rover"
<rover@mailman.qth.net>; "VHF Contesting" <vhfcontesting@contesting.com>
Sent: Saturday, June 29, 2002 7:42 PM
Subject: Re: [50mhz] Spark Plug Noise on F150
> Magnecor wires?? YES!!! I have talked to several hams who have used
> them and had excellent results....Also make sure all parts of the body
> are well bonded.....and always use resistor style plugs....
> (any of those "Special" plugs with split electrodes, etc donot help
> and DONOT improve the engine from what I have seen and read!)
> I have the Magnecor email msgs archived on my PC....I'll dig them
> out and repost them for you and others to read...
>
> Chris
> WB5ITT
>
> Rick Robinson wrote:
>
> > I would like to stop the noise at the source which essentially is the
> > plugs and/or the wires.
> > I would mainly like to hear from those with the same type vehicle or
> > motor who have
> > addressed this problem before.
> > Spark plug testimonials.
> > Plug wire testimonials, Yes I have heard of Magnacor wires but have they
> > really worked on this
> > motor? And with what plugs? A lot of money to experiment with on
> > wires($100).
> > Contrary to most beliefs the noise blanker in my 706 works well on my
> > spark plug noise
> > on most all bands, but I want the noise out before the blanker.
> >
> ------
> Submissions: vhf@w6yx.stanford.edu
> Subscription/removal requests: vhf-request@w6yx.stanford.edu
> Human list administrator: vhf-approval@w6yx.stanford.edu
|