Regarding using a 6M antenna on 2M...
Back in November 2000 I operated 6 Meters from Guadeloupe. One evening the
TEP (trans-equatorial propagation) was very strong on 6 Meters to Brazil. I
had read TEP can sometimes be worked on 2M. I asked PY5CC to listen for me
on 144.200 MHz. Unfortunately, I did not bring along a 2M yagi. I was using
a 2 element quad on 50 MHz. I went ahead and loaded it up on 2M. Lo and
behold, I copied PY5CC solid on 2 Meters and was able to work Peter while
running about 15 watts. The distance is almost 4,900 KM.
PY5CC 144200.1 FG/N0JK 559 TEP YES 0042 27 Nov 2000
So a simple 6M antenna can work on 2M in a pinch and is capable of read DX.
I also think this 2M TEP QSO shows how strong propagation can be via this
mode and PY5CC's station and operating skill were a factor.
- Jon N0JK
>Recently,
>however, I tried my 6 meter 5 el CushCraft on 2 meters, and it works just a
>little better than a dummy load. My guess is that the 3/4 wave dipole thing
>works, but the key to if a particular antenna working depends on if the
>matching can pass the desired frequency. With my FINCO, matching was
>untuned, but with the Gamma Match on the 6 Meter antenna, it just didn't
>work.--Mike, WV2ZOW
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|