VHFcontesting
[Top] [All Lists]

[VHFcontesting] Rovers operating at home

To: vhf contesting <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Rovers operating at home
From: Rick R <rick1ds@hotmail.com>
Date: Wed, 20 May 2015 16:21:45 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Yes, you can operate both a rover station and a fixed station from the same 
"home" grid, as long as the equipment and antennas are separate for both 
stations. The rover must operate from at least 2 grids. I have done this for 
many contests to give the locals a few extra points from the home station. I 
send in both station scores separately. Rick, K1DS

From: billk3ege@gmail.com
Subject: Fwd: [VHFcontesting] Rovers operating at home
Date: Wed, 20 May 2015 14:39:29 -0400
To: rick1ds@hotmail.com

This is what you do isn't it ?

Sent from my iPhone
Begin forwarded message:

From: Jarred Jackson <jarred.jackson@hotmail.com>
Date: May 20, 2015 at 12:00:46 PM EDT
To: VHF Contesting <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Rovers operating at home

The ARRL rules say that rovers can submit separate logs as a single operator in 
addition to rover logs. 
Does this mean that I can work someone from my home grid twice? Once as KF2MR/R 
FN13 and once as KF2MR FN13 ? 
It has never been an option before as I didn't have enough gear for two 
stations, but it looks like I will for June and I like to be home later at 
night. 
Any thoughts? Are there any restrictions to this concept? I saw a related 
thread "Category question" in the archive from 2003 but I can't open it for 
some reason.

Jarred - KF2MR
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
                                          
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>