VHFcontesting
[Top] [All Lists]

[VHFcontesting] 222 MHz activity Night and other stuff

To: "222 >> 222Activity@groups.io" <222Activity@groups.io>, "NEWSVHF@mailman.qth.net" <NEWSVHF@mailman.qth.net>, "vhfcontesting@contesting.com" <vhfcontesting@contesting.com>
Subject: [VHFcontesting] 222 MHz activity Night and other stuff
From: David Olean <k1whs@metrocast.net>
Date: Mon, 3 Oct 2022 16:43:09 -0400
List-post: <mailto:vhfcontesting@contesting.com>
Hello 222 ops.

Tuesday night is coming up fast and that means it is time to get on222 MHz and experience real contacts with real people.  Just imagine  turning on the power switch of your VHF UHF station and hearing other stations calling CQ and actually trying to make contacts! Yes I know, it is a novel approach, but in the "olden days" people used to get on the VHF and UHF bands and do just that! That was before 24 hour television news, 23 bazillion TV channels, Smartphones, streaming videos, pub crawling,and the Dodgers being in Los Angeles!

Activity on 222 is a tad sparse in a few areas of the country, but the solution for those areas is to get on and make noise even if you have to call up your buddy in the next grid to get on to make a contact.  Actual time is after dinner. Here on the East Coast it all is usually swinging after about 2300 UT. There is considerable activity building in the mid west and they tend to appear a bit later and stay on well after the East Coasters have all called it a night after about 01:30 UT. It all depends on conditions and activity of course.  N0URW worked a pile of station last week from Iowa, and K9MRI was cleaning up as well. Many other  stations were in there as well. N6ZE is lamenting a lack of activity around California. He gets on anyway and makes noise and works a few stations, but it must be a labor of love for the results he gets.  I hope things turn around there. The Pacific NW has some fair activity as does the SE part of the US, but activity could be better in every corner of the USA.  For my part, I get on starting at a bit B4 23:00 UT and start CQing on 222.100.  I monitor the ON4KST Chat page and   am always looking for skeds over paths beyond what I can normally work.

Last week was the 222 MHz Sprint and I had a blast here in the first few minutes after 23:00 UT. The Moon was just setting and I nabbed a few EME contacts to pick up two grids not normally worked from Maine, EM84, and BL10.  NH6Y is in BL10 and he entered the Sprint with two contacts from Maui.  Now there is a 222 Sprint first!! Activity was pretty good here, but was better five to seven years ago, so we need more activity to take up the slack!

My generator was limping along pretty well in the Sprint . It suffered from intermittent speed variations that happened at a 1 Hz rate. The speed control would hunt for a proper speed and. after awhile, would settle down. (or not!) I had fixed the problem that kept it shutting down, but was struggling with the speed problem. At first, I figured it was a speed controller problem. Then it was possibly a fuel problem. I had a diesel guy neighbor come look at it and his opinion was that my fuel system was working just fine and that it must be a governor setup problem. I removed everything and set it up again with the actuator resting position at fuel stop. I also rigged up a nifty test box with test probe receptacles so I can easily plug in a VOM to monitor all important governor voltages. I found that my actuator current was way too high. The manual calls for 1 amp at no load, and I was seeing 5 or 6 amps. So I re rigged the linkages to have the actuator work on a different part of its curve. The voltage dropped to just under 2 volts with no load after considerable tweaking.  2 volts is an optimum point at zero load. That represents about 1 amp current draw in the actuator. As soon as I reduced the actuator current, things got much better. The instability is gone and the engine purrs along nicely. I had cranked down the RPMs while testing, so my last effort was to set the speed back up for 60 Hz.  A trimpot on the controller will set the speed. It is now at 60.2 Hz.  I was very excited and celebrated by listening on ten meters only to find high VSWR and poor pattern on the yagis.  WHAT?  It never ends at Dave's station.  I will be back with my handy dandy antenna tester and climb the ten meter tower to see what is wrong up there.  BUT tomorrow night is reserved for 222 Night. I can't wait to see how the speed regulation is.  Circle the date! Tuesday night 23:00 UT, 222.100 MHz.  Spread out if things get busy!!  CU there.  Maybe we'll have an aurora?

Dave K1WHS

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>