I can get the second Rttyrite window for my K3 subreceiver to function
properly if I choose either Soundcard AFSK or my HAL DXP38 but not with
MMTTY. I am pointing [Rttyrite2] to an installation of MMTTY that works
fine standalone, though I start it with an mmtty.exe -z command line when I
do that.
I have tried deleting the [Rttyrite2] section of writelog.ini and starting
fresh, but I still have the problem that the "Initializing MMTTY" doesn't
disappear, and MMTTY never starts.
I also have another, probably unrelated problem using the K3 "two slot" rig
driver. When I click on the second entry window, the audio from the main
receiver is muted. It stays muted until I rotate the AF Gain control.
Jim N7US
-----Original Message-----
I have the K3 configured with the two-slot setup (thanks, W0YK). I have
both MMTTY, which uses an MMTTY-L folder, and a cloned receiver/decoder,
which is a DXP38, working for the main receiver. MMTTY uses COM 4 for
FSK/PTT.
Does the cloned receiver, now only used for the main receiver / VFO A, have
a section in writelog.ini? Since I seem to need to start it manually it
each time the program starts I'd assume the answer is no.
Here's the problem:
I can get Soundboard AFSK to decode on VFO B, the K3 subreceiver, but I
can't get MMTTY to initialize.
I have writelog.ini:
[Rttyrite2]
MMTTY_LOCATION=C:\Ham\MMTTY-R\
Is that the section of writelog.ini that is used for the subreceiver? That
section of writelog.ini is the same as [Rttyrite] except for the folder for
the MMTTY installation.
I am running Windows 7/64.
Jim N7US
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|