Well my Autosave is set to 10 so I don't think that is the problem. In fact
you can often see the Autosave engage while transmitting without it
interrupting anything.
Connie K5CM has an interesting solution. Unfortunately I'm in /W4 right now
so can't try it.
73, Don VE3XD
-----Original Message-----
From: Bill Turner [mailto:dezrat1242@ispwest.com]
Sent: Monday, January 09, 2006 4:30 PM
To: Don Cassel; 'Mike'; writelog@contesting.com
Subject: RE: [WriteLog] Intermittent PTT Dropout
ORIGINAL MESSAGE:
At 11:31 AM 1/9/2006, Don Cassel wrote:
>Mine mostly happens when I am running. It usually occurs just after the
>CQ message begins. Interestingly I can sometimes operate for an hour or
>more without it happening then it will occur several times. But there
>is no regular pattern. It can also happen when sending my exchange or
>replying to a caller. I've tried a lot of variations such as using auto
>cq, lower power, different message lengths, different setup
>configurations and nothing either fixes it or lets me reproduce it at
>will. It seems to have a mind of its own.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
One other possibility - just a guess - is the autosave feature may be
interrupting things. Try turning autosave off next time. I believe you have
to edit the writelog.ini file to do this.
I notice when you get a large number of Qs in the log autosave can take a
while. This might explain why it only happens after hours of operating.
Bill, W6WRT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|