Windows XP, just upgraded last week to latest WL upgrade.
MMTTY will work properly, key the rig and send diddles or message.
I used WL last in IARU on cw only and it worked properly.
Same interface simple trans/resistors on com 5 for ptt, cw, fsk.
I choose the MMTTY interface from the TU type.
Under setup, I have Windows Sound Board and PC Generates
rig is on com 2
rotator on com 1
nothing on com 6
MMTTY is set to com 5
I have the com 3 is 5 and com 4 is 6 settings in my ini file
So when I click a buffer, it keys the rig and only sends a steady tone with a
sort of
clicking, no diddles
(again, if I shut down WL and just run MMTTY, it operates on that com port
properly.
In fact I worked a few stations yesterday.
Every time I switch from cw to rtty, I have trouble getting the ports correct.
Trying to set the Port to com 5 in the Rttyrite windows always results in a
Port not
available error.
-----------------------------------------------------
I wish Noah had swatted those two flies!!
-----------------------------------------------------
Bill H. in Chicagoland
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|