CW Trasmition buffer problem ???
I have noticed the following problem meanwhile CW keying.
I was a CT user, and I used to press INSERT Key, when a partial callsign was
introduced, and during the "%C + 5NN" transmision (CW keying) I was entering
the last letters of the callsign.
Maybe an example can clarify it:
I was called by: "W1ABC", so I entered in the QSO field: W1A, just at this
point I pressed INSERT Key (so the TX was starting) and meanwhile the WL32
was TX'ing... "W...1...A" ... I could finish to enter the last letters of
the callsign... "B" and "C"
I'm using a old computer: Pentium II - 200 Mhz + 160 Mbytes Ram.
I have also noticed, that during the transmision, a "Red Frame" is activated
during the Keying, and if I add some characters meanwhile this "red frame"
is preset, any new input character is transmited. The problem I have, is
that this "Red Frame" disappear just when the first character of the
callsign is transmited, on the previous example, just when the "W" is TX, so
any new character is correctly entered into the callsign field but it's not
TX.
I have tested on another computer (2 GHz CPU) and the problem is not
present. The "Red Frame" is activated during long time, so I can add more
letters at the callsign, so they are transmited correctly.
Does any one detected a similar problem? Or my real question: How I can fix
it on my slow computer? I cannot use the 2 Ghz computer during this
weekend....
PSE, any comment or answer to be replayed directly to: ea4tx@ea4tx.com
I have few hours for fix this problem.
Thanks in advance!
|