John,
Is the keyer turned on in your radio?
How is your CW interface connected? If the emitter of the
transistor is returned to pin 1, have you set CW_ON_PIN1=1
in the INI file?
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of John
> and Mary Powell
> Sent: Saturday, February 02, 2008 2:18 AM
> To: writelog@contesting.com
> Subject: [WriteLog] BROKEN CW WITH WL10.65 AND DIRECT-IO AS
> LPTDRIVER/INTERFACE
>
>
> I have recently re-installed WL, initially with v10.64 and
> subsequently upgraded to 10.65. Somewhat belatedly I
> discovered that these versions do not support LPT keying and
> as a result I installed Direct-IO (evaluation model
> meantime). The problem - broken CW, generally on an
> unintelligible nature. Is there someone on the Reflector who
> has experienced this problem and if so would be kind enough
> to suggest a cure. The re-installation has been made on a
> HPCompaq NX5000 laptop, principally for portability reasons.
> Any assistance would be appreciatively welcome.
>
> 73 and thanks in advance
> John Powell. ZL1BHQ
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|