Corrected description, sorry, mind thought com port and wrote audio.....
(error may repeat)
It's with the COM port, both writelog and WSJT want to access COM2 for radio
info
Loading WSJT first, then writelog produces error message:
Com2 not available
Access is denied
And writelog has no frequency data. That's OK if only doing WSJT session
and logging to writelog.
Was there a com port sharing program or work around?
73 Robert W5AJ
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Don
Hill AA5AU
Sent: Thursday, December 13, 2018 10:15 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] WRITELOG and WSJT
Typically, Windows programs will share a sound card. That is what gives many
of us the ability to run several different type of RTTY decoders at the same
time - MMTTY, 2Tone, Gritty, etc.
One solution would be to run WriteLog without Rttyrite. Then no sound card
should be used by WriteLog unless you have a CW decoder window open (which
you probably don't).
Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Robert
Sent: Thursday, December 13, 2018 3:38 PM
To: writelog@contesting.com
Subject: [WriteLog] WRITELOG and WSJT
When attempt to run writelog and WSJT - whichever I load first gets the
audio board.
I don't want to be turning audio board off on writelog to use WSJT and
writelog is logging through UDP
Solutions???
73 Robert W5AJ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|