Jerry,
The only other anomaly that I see is the settings and how WL changes them.
Since WL initializes the keyer each time you start, and I haven't researched
if there's an ini file setting for defaults, some settings such as weighting
gets changed when you start. I find that I have to manually set the
weighting each time I enter WL. It then resets it back to the default WL
weighting upon exit, and not the units default settings.
So this leaves you with after exiting WL, either pulling the battery or
starting the Wkey2 Mgr program to recall the internal memory stored
parameters.
Other then that, if you use it for So2r, which Hank says works great, you
can use WL to switch between the 2 key/ptt ports on the back and run 2
separate rigs.
Excellent little CW keyer.
Charlie
KI5XP
> Date: Fri, 12 Sep 2008 10:54:55 -0400
> From: Jerry Flanders <jeflanders@comcast.net>
> Subject: [WriteLog] UPDATE - Winkey USB CW keyer and WL?
> To: writelog@contesting.com
> Message-ID: <6.2.5.6.0.20080912103439.042152e0@comcast.net>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> I have my WKUSB working with Writelog now. It was working all along, but
mute.
>
> For those running up against this problem in the future reading the
> archives: When WL establishes contact with the K1EL WKUSB CW keyer
> (perhaps other Winkey / Winkeyer versions as well), it silences the
> WKUSB internal speaker, so you have no clue that it is working unless
> you have fully wired it up to the rig and the rig is on in active CW
> mode. The memory buttons appear to have gone dead, but that is only
> because the speaker is mute.
>
> You won't learn anything about this in the WL "documentation". My
> search of the reflector archives didn't turn it up either.
>
> Thanks to ZL2AL for pointing this out after I contacted him
> concerning his eham posting.
>
> Jerry W4UK
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|