Hi John, Ron, et All,
Now I am getting 'cornfused.'
When I start WriteLog, I select a rtty window and select my
TU in the first rtty window. No tuning indicator pops up.In
the second rtty window, I select "sound card" as the TU. The
tuning indicator pops up
I understood Wayne to say that the cross hairs are left over
from when WriteLog did not do these things and that the
cross hairs are not available when the sound card *IS*
selected as the TU.
This means to me, there is no tuning indicator for a
non-sound card TU. Am I missing something? I can't find the
cross hairs period, when the sound card TU is not selected.
We do not have a Tabby or a "Wabbit" as my grand daughter
calls them, so there are no whiskers or cross hairs at this
qth.
I have attached a screen shot. Does anyone see anything I am
missing? All help is appreciated?
73s,
Grant
W4OJC
----- Original Message -----
From: "Ron Stone, Vine Antennas" <vine@csma-netlink.co.uk>
To: "WA9ALS - John" <wa9als@starband.net>
Cc: <writelog@contesting.com>
Sent: Tuesday, April 03, 2001 6:23 AM
Subject: Re: CHECK THIS OUT Re: [WriteLog] CROSSHAIRS???
>
> In message <007c01c0bbb9$d92ca720$0201a8c0@wa9als>,
WA9ALS - John
> <wa9als@starband.net> writes
> >> If you run RittyRite and use the RTTY tuning indicator
you get the
> >> crossed cigars.
> >>
> >> So far nobody has suggested how you get the crosshairs
with RttyRite
> >on
> >> the screen, which the original posting was about.
> >
> >Well, this is guaranteed to confuse the thread... Check
out
> >http://www.qsl.net/wa9als/CROSSHAIRS.gif
> >
> >This shows the crossed bananas -and- you can see
"crosshairs" in there
> >too!
> >As you can see, I got this display by using my RIT to
tune off-frequency
> >while the AFC was on. If the signal was properly tuned,
the cross hairs
> >were not visible. Only Wayne could explain what's going
on here!
> >
> >If memory serves (probably NOT), earlier versions of WL
would show the
> >crosshairs and the elipses appeared superimposed over the
"+". However,
> >now you don't usually see the cross hairs...?? I don't
care myself, but
> >thought the above screenshot might be interesting to
those in this
> >thread...? HI 73
> >
> >
> >
>
> Hi John
>
> I began to wonder. Maybe I was imagining seeing the
crosshairs and the
> tuning indicator on the Writelog Screen?
>
> So I just had another look. For the tuning indicator go to
the Writelog
> official site and look at "tuning.htm". There's an example
of it "spot
> on" and also nine examples of it not "spot-on"
>
> Then go to the screen2.htm page and there she is- "tuning"
down the
> bottom right hand corner.
>
> If I try to get the "tuning indicator" on screen (I assume
this is the
> same as the "Tuning indicator and audio snapshot" in the
start-up menu)
> then I have to close down RttyRite to do it, and that's
not a heap of
> use.
>
> That's what I want. Tuning indicator, RttyRite and
Writelog, all dancing
> together. It's there on the website. Does nobody have an
idea how to do
> it? Damned if I do.
>
> DOS Window, some clever set-up ??? There must be a way...
> 73
>
> Ron
> Check out these new products -- INRAD Filters and
Prosistel Rotators.
> See our site http://www.vinecom.co.uk
>
>
> Ron Stone,
> Vine Antenna Products,
> The Vine,
> Llandrinio,
> POWYS SY22 6SH,
> U K.
>
> Tel - +44 (0) 1691 831111
> Fax - +44 (0) 1691 831386
> E-Mail vine@csma-netlink.co.uk
>
> Our WEBSITE is at http://www.vinecom.co.uk
> __________________________________________________
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|
