WriteLog
[Top] [All Lists]

Re: [WriteLog] IC-7000 DTR /RTS PTT still not working right

To: writelog@contesting.com, lists@subich.com
Subject: Re: [WriteLog] IC-7000 DTR /RTS PTT still not working right
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Date: Tue, 7 Jul 2009 22:33:01 -0700 (PDT)
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Joe

Made that and several other things and the same results
I think that my problem is this

Add settings to [RIGS] for initializing RTS/DTR for Rig COM ports 

but i'm Lost  where is or how to make the correct SET UP

i add the [RIGS]  section and nothing happen  

I can send my writelog INI   if that help

J. Hector Garcia XE2K / WT6J

   Mexicali B.C  DM22fp

P.O.Box 73 

El Centro CA 92244-0073

USA

http://www.xe2k.net

http://www.dxxe.org

--- On Mon, 7/6/09, Joe Subich, W4TV <lists@subich.com> wrote:

From: Joe Subich, W4TV <lists@subich.com>
Subject: Re: [WriteLog] IC-7000 DTR /RTS PTT
To: "'Hector Garcia XE2K'" <j_hector_garcia@sbcglobal.net>, 
writelog@contesting.com
Date: Monday, July 6, 2009, 8:13 PM


Hector, 

Even though you do not use the interface for CW (and have 
no "key" line connected) set WriteLog as follows: 

In Set-up | Ports 

  1) check "CW" on the same port as you use for the radio 
  2) Set CW Keyer type to "PC Generates" 
  3) check "All mode PTT on CW Port RTS" 
  4) click "OK" 

When you return to the main screen, select "Setup -> Save 
Configuration.  

This will put PTT on the same port as CI-V and should 
release the constant PTT when WriteLog is running. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: writelog-bounces@contesting.com 
> [mailto:writelog-bounces@contesting.com] On Behalf Of Hector 
> Garcia XE2K
> Sent: Monday, July 06, 2009 9:59 PM
> To: writelog@contesting.com; lists@subich.com
> Subject: Re: [WriteLog] IC-7000 DTR /RTS PTT
> 
> 
> My interface is very simple
> 
> G8XGG  is the builder
> 
> here the web page  http://www.xggcomms.com/page9.htm
> 
> and this is the one i have
> 
> http://cgi.ebay.com/Icom-PSK31-CAT-Interface-IC-703-706-78-718
> -and-more_W0QQitemZ370167897186QQcmdZViewItemQQptZLH_DefaultDo
> main_0?hash=item562fb9dc62&_trksid=p3286.c0.m14&_trkparms=65%3
> A12|66%3A2|39%3A1|72%3A1234|293%3A1|294%3A50
> 
> 
> 
> J. Hector Garcia XE2K / WT6J
> 
>    Mexicali B.C  DM22fp
> 
> P.O.Box 73 
> 
> El Centro CA 92244-0073
> 
> USA
> 
> http://www.xe2k.net
> 
> http://www.dxxe.org
> 
> --- On Mon, 7/6/09, Joe Subich, W4TV <lists@subich.com> wrote:
> 
> From: Joe Subich, W4TV <lists@subich.com>
> Subject: RE: [WriteLog] IC-7000 DTR /RTS PTT
> To: "'Hector Garcia XE2K'" <j_hector_garcia@sbcglobal.net>, 
> writelog@contesting.com
> Date: Monday, July 6, 2009, 5:39 PM
> 
> 
> Without knowing the specifications on your particular interface 
> it is difficult to provide specific advice for your hardware. 
> However, unless you are doing CW and PTT on the radio port or 
> the radio requires handshake on RTS/CTS (e.g., Kenwood), WriteLog 
> sets RTS and DTR high on the radio ports. 
> 
> See the "WRITELOG.INI [RIGS] section of the help file for the 
> information on overriding the default operation of RTS and DTR. 
> 
> 73, 
> 
>    ... Joe, W4TV 
>  
> 
> 
> 
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com] On Behalf Of Hector 
> > Garcia XE2K
> > Sent: Monday, July 06, 2009 4:55 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] IC-7000 DTR /RTS PTT
> > 
> > 
> > Hi Guys
> > 
> > Having several Days trying to find the correct configuration
> > to make work the IC-7000 with WL  and stop the PTT to be 
> > stuck when start the WL
> > 
> > I have an CI-V sound card interface that i bought on Ebay
> > from a Seller of UK, the interface works WITH NO ISSUES with 
> > the Ham Radio Delux, just  select the DTR and  the radio 
> > works no problem, this interface is a Serial with DB-9 
> > connector and  can be used with the USB to Serial adaptor and 
> > no problem.
> > 
> > I try to  change all the things I THINK was needed  based on
> > the HELP files for ICOM in WL and some info i get from the 
> > List, but  changes make no difference the CI-V works fine  at 
> > any baud speed  but when connecting the 13 pins DIN the PTT 
> > get stuck  , removing the radio from the  PORT set up on WL 
> > the PTT stop. i'm just using the CI_V and will like to have  
> > all working
> > 
> > Wha is my problem or what i'm  missing to change on the
> > WRITELOG.INI to make  the radio stop the PTT  when selected.
> > 
> > 
> > 
> > J. Hector Garcia XE2K / WT6J
> > 
> >    Mexicali B.C  DM22fp
> > 
> > P.O.Box 73
> > 
> > El Centro CA 92244-0073
> > 
> > USA
> > 
> > http://www.xe2k.net
> > 
> > http://www.dxxe.org _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com 
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>