RS also makes a short cable (about 6 inch) with a thumb wheel type volume
control and M/F connectors. I've used it with success in situation where
soundcard out/input needed to be adjusted.
W0ETC
On Sun, 17 Nov 2002 18:59:50 -0500 "WA9ALS - John" <wa9als@starband.net>
writes:
> Ust saw this - sounds like the same cable, and sounds like it works!
> 73
>
> ----- Original Message -----
> From: "Stan Staten" <n3hs@qsl.net>
> To: "'Jack Colson'" <jackcolson@netsignia.net>;
> <writelog@contesting.com>
> Sent: Sunday, November 17, 2002 5:24 PM
> Subject: RE: [WriteLog] Soundcard output attenuator ?
>
>
> >
> > I used an attenuator cable from Radio Shack. It is the one that
> I
> > bought to record from the radio as the radio overdrove my casette
> > recorder. It is a stock item on their shelves.
> >
> > 73 Stan, N3HS
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|