WriteLog
[Top] [All Lists]

RE: [WriteLog] Icom ICOM CT-17

To: "George Johnson" <w1zt@comcast.net>,"Nick Kail" <m3mlr@tiscali.co.uk>,"'John Hoaglun'" <john@hoaglun.com>, writelog@contesting.com
Subject: RE: [WriteLog] Icom ICOM CT-17
From: "Bob Naumann - N5NJ" <n5nj@gte.net>
Reply-to: Bob Naumann - N5NJ <n5nj@gte.net>
Date: Sat, 14 Feb 2004 05:53:19 -0600
List-post: <mailto:writelog@contesting.com>
George,

This has come up in another forum recently.

What was suggested as one possibility would be to set up another com port in 
the WriteLog.INI file to have the same addresses and IRQ as the one where the 
CT-17 is connected.  It might work.  I don't have 2 icom radios to test it on.

73,
Bob N5NJ

> ------------Original Message------------
> From: George Johnson <w1zt@comcast.net>
> To: "Nick Kail" <m3mlr@tiscali.co.uk>, "'John Hoaglun'" <john@hoaglun.com>, 
> <writelog@contesting.com>
> Date: Sat, Feb-14-2004 5:05 AM
> Subject: RE: [WriteLog] Icom ICOM CT-17
> 
> Nick, John,
> While the CT-17 will support multiple radios with a different CI-V address, 
> I do not believe Writelog will support issuing commands on the same Com 
> port with the different CI-V addresses.  You can select only one radio 
> "type" for that Com port.
> 
> 73, George .. W1ZT
> 
> At 02:19 AM 2/14/2004, Nick Kail wrote:
> >All you need to change on your 746 is the CI-V address to make sure it isn't
> >the same as your 756
> >
> >73's
> >Nick
> >2E0MLR
> >
> >-----Original Message-----
> >From: writelog-bounces@contesting.com
> >[mailto:writelog-bounces@contesting.com] On Behalf Of John Hoaglun
> >Sent: 14 February 2004 03:35
> >To: writelog@contesting.com
> >Subject: [WriteLog] Icom ICOM CT-17
> >
> >I currently own an Icom 756 and I am in the process of acquiring an Icom
> >746.  Currently I use an Icom CT-17 multi port interface with my 756 which
> >works fine with Writelog.
> >
> >Can I use my currently CT-17 (it is a 4 port box) to interface my 756 and my
> >746 using a signal serial port with Writelog?
> >Or will I need another CT-17 (original or clone) to get rig control/data
> >between my 746 and my pc?
> >
> >I would prefer to use a single CT-17 since it was design to connect to
> >several radios at one time. I would hate to have to give up another serial
> >port if it can be avoided.
> >
> >73
> >
> >John Hoaglun - MCSE
> >KC0LBT - EN35ib
> >http://www.hoaglun.com
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>