Hello,
I just purchased Write Log today, and I am having a problem getting Write
Log to key CW via the LPT port.
I am using a 25 pin LPT cable between my Windows 2000 laptop and the SCK II
keyer.
When I have the cable disconnected, the keyer generates code messages from
any of the programmed keys.
When I connect up the LPT cable, the Function keys on the laptop with Write
Log running do not generate any cw.
Also, if I turn on the SCK II Monitor switch, the keyer has a solid tone
until I disconnect the 25 pin LPT cable. So, it appears that something is
keeping the monitor tone on solid.
Any help would be appreciated.
Thanks,
Jim
K4PV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|