G,
Go to the WriteLog programs group and run the "Edit sub-bands" utility. A
small window will open for you to input the band ranges you need for CW,
Digital and Phone. Also check the WL Help manual section 'Editing
Sub-bands' for instructions on how to use this utility if necessary.
73,
Gary AL9A
-----Original Message-----
From: G
Sent: March 25, 2014 1:39 PM
To: writelog@contesting.com
Subject: [WriteLog] WL band plan
After reinstalled the software recently I found that the band plan for
Canada is gone naturally.
I do not recall at all how to configure it again
I erased all default band edge frequencies.
To make sure the good band edges wil appear in the band map I must reinstall
the band plan frequencies.
Can someone help me
Gilles ve2lx
===================
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|